Producers of gasoline chainsaws offer various warranty terms. Usually it’s 5-year warranty. Nevertheless, a lot depends on operators themselves. It’s obvious that careful use is a must. Many owners want to prolong this term. In this article you’ll find pieces of advice about gasoline chainsaw tune-up. They will help to use your chainsaw without serious breaks for several years.
Life and reliability of your tool could be optimized. Regular servicing is a crucial thing, so don’t skip it. Several routines will definitely help to maintain your instrument. They can be divided into three groups: daily, weekly and monthly routines.
Daily routines for gasoline chainsaw tune-up
What concerns daily routines, don’t forget to check the throttle trigger. In case of blinding or the engine doesn’t return the idle, take your instrument to the dealer as quickly as possible. Don’t forget to clean the chain break. Check your chain catcher, if it’s damaged replace it. Clean your air filter, in case there is holes in it buy a new one. Lubrication hole in the bar should be empty, so check it before every use. Oiler should work properly and give enough lubricant to the bar and chain. Chain should be always sharp, pay attention to this. You can sharpen it by yourself or give it to professionals.
Above-mentioned tips on gasoline chainsaw tune-up for everyday don’t make the whole list. In addition, starter and starter cord also need some attention, cause tend to wear out. Nuts and screws of your tool should be always tightened. Stop switch shuts off the engine immediately, if this doesn’t happen bring chainsaw to the dealer. Cooling system should be also checked, if you don’t want to deal with overheated instrument. Don’t think that these daily routines are needless. Take them into consideration before every single use of your chainsaw.
Weekly routines also have great impact on the life of gasoline chainsaw. AV elements should be checked on weekly basis. Once a week lubricate the clutch drum bearing. Spark plug needs to be cleaned and the gap to be checked (appropriate gap is equal to 0.020 inch). Flywheel fins should be cleaned every week. Pay attention to the cylinder and clean cooling fins. Muffler screen should be also cleaned or replaced. Carburetor and air box are usually dirty after a week of exploitation so remove all dirt. These are weekly routines for gasoline chainsaw tune-up. They are even simpler than daily routines, so don’t forget about them.
Monthly routines also have great importance and usually operators skip them. First of all have a look on break band for wear. Clutch center, clutch spring and clutch drum should be checked for damages every month. Yes, remove dirt and small particles from carburetor every month. Fuel filter should be changed if something is wrong. Inside of fuel and oil tanks dirt can be also found, so remove it every month. Your tool has cables and connections that should function properly. Check them for damages. These are all thing for monthly gasoline chainsaw tune-up.
Following these simple rules of gasoline chainsaw tune-up, you’ll prolong the term of exploitation. Careful use together with right falling techniques will also help your tool. It’s always better to avoid serious breakdowns, rather than spend additional money on maintenance. It doesn’t matter whether you own simple not powerful instrument or professional one. Just don’t forget about these routines and work with pleasure every day.